Content Filter Policy Add Or Edit Screen; Figure 414 Anti-X > Content Filter > General > Add L; Table 179 Anti-X > Content Filter > General > Add - ZyXEL Communications ZyWALL USG 100 Series User Manual

Table 178 Anti-X > Content Filter > General (continued)
LABEL
Apply new Registration
Apply
Reset

32.3 Content Filter Policy Add or Edit Screen

Click Anti-X > Content Filter > General > Add or Edit to open the Content Filter Policy
screen. Use this screen to configure a content filter policy. A content filter policy defines
which content filter profile should be applied, when it should be applied, and to whose web
access it should be applied.
Figure 414 Anti-X > Content Filter > General > Add l
The following table describes the labels in this screen.
Table 179 Anti-X > Content Filter > General > Add
LABEL
Schedule
Address
Filter Profile
User/Group
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
This link appears if you have not registered for the service or only have the
trial registration. Click this link to go to the screen where you can register for
the service.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select a schedule to define when to apply this content filter policy. You can define
different policies for different time periods. For example, you could have one policy that
blocks access to certain categories of web sites during working hours and another
policy that allows access to certain categories after the work day is over.
Select Create Object to configure a new schedule (see
details).
Select none to have the content filter policy apply all of the time.
Select the address or address group for which you wan to use this policy.
Select Create Object to configure a new address or address group.
Select any to have the content filter policy apply to all of the web access requests that
the ZyWALL receives from any IP address.
Use the drop-down list box to select the content filter profile that you want to use for
this policy. The content filter profile defines to which web services, web sites or web
site categories access is to be allowed or denied. Use the content filter Filter Profile
screens to configure the profiles.
Use the drop-down list box to select the individual or group for which you want to use
this policy.
Select Create Object to configure a new user account (see
606 for details).
Select any to have the content filter policy apply to all of the web access requests that
the ZyWALL receives from any user.
Chapter 32 Content Filtering
Chapter 39 on page 629 for
Section 36.2.1 on page
543