Figure 365 Application Patrol Bandwidth Management Example - ZyXEL Communications ZyWALL USG 100 Series User Manual

Figure 365 Application Patrol Bandwidth Management Example

SIP: Any to WAN
Outbound: 200 Kbps
Inbound: 200 Kbps
Priority: 1
Max. B. U.
HTTP: Any to WAN
Outbound: 100 Kbps
Inbound: 500 Kbps
Priority: 2
Max. B. U.
FTP: WAN to DMZ
Outbound: 100 Kbps
Inbound: 300 Kbps
Priority: 3
No Max. B. U.
28.1.3.1 Setting the Interface's Bandwidth
Use the interface screens to set the WAN zone interface's upstream bandwidth to be equal to
(or slightly less than) what the connected device can support. This example uses 1000 Kbps.
28.1.3.2 SIP Any to WAN Bandwidth Management Example
• Manage SIP traffic going to the WAN zone from a VIP user on the LAN or DMZ.
• Outbound traffic (to the WAN from the LAN and DMZ) is limited to 200 kbps. The
ZyWALL applies this limit before sending the traffic to the WAN.
• Inbound traffic (to the LAN and DMZ from the WAN) is also limited to 200 kbps. The
ZyWALL applies this limit before sending the traffic to LAN or DMZ.
• Highest priority (1). Set policies for other applications to lower priorities so the SIP traffic
always gets the best treatment.
• Enable maximize bandwidth usage so the SIP traffic can borrow unused bandwidth.
ZyWALL USG 100/200 Series User's Guide
SIP: WAN to Any
Outbound: 200 Kbps
Inbound: 200 Kbps
Priority: 1
Max. B. U.
FTP: LAN to DMZ
Outbound: 50 Mbps
Inbound: 50 Mbps
Priority: 4
No Max. B. U.
Chapter 28 Application Patrol
ADSL
Up: 1 Mbps
Down 8 Mbps
459