Interface Group > Add Screen - ZyXEL Communications LTE3301 Series User Manual

13.2.1 Interface Group > Add Screen
Click the Add button in the Interface Group screen to open the following screen. Use this screen
to create a new interface group.
Note: An interface can belong to only one group at a time.
Figure 68 Network > Interface Group > Add
The following table describes the fields in this screen.
Table 46 Network > Interface Group > Add
LABEL
Group Name
Enable Tx TAG
VID
Grouped LAN
Interfaces
Available LAN
Interfaces
Back
Apply
Cancel
Chapter 13 Interface Group
DESCRIPTION
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
Click the check box to set the port to tag or not to tag all outgoing traffic with the VLAN ID.
This shows the VLAN ID number (from 0 to 4094) for traffic through the interfaces in this
group.
This field is not configurable and the VLAN ID is assigned automatically by the system.
This shows the LAN port(s) or WLAN interface(s) as a member of the VLAN interface group.
Select any interfaces that you don't want and click the right arrow button to remove them
from this group.
This shows the available LAN interface(s) (Ethernet LAN or Wireless LAN) that can be
selected to form a VLAN interface group.
Select the interfaces that you want and click the left arrow button to add them to this group.
Click Back to quit and return to the previous screen.
Click Apply to save your changes back to the LTE3301.
Click Cancel to exit this screen without saving.
LTE3301 Series User's Guide
103