Making A Phone Call; Configuring The Cn3 Parameters - Intermec CN3 User Manual

Making a Phone Call

Configuring the CN3 Parameters

CN3 Mobile Computer User's Manual for Windows Mobile 6.1
To activate the GSM/EDGE phone
Install the SIM card in the CN3. For help, see
•
miniSD or SIM Card" on page 34.
You may need to configure network settings for your provider. For
information, tap Start > Help and see the procedures in the Windows
Mobile online Help. Or, contact your network provider.
After you activate your phone, you are ready to start making phone
calls.
To make a phone call
1 Tap Start > Phone.
2 Tap the keys to enter the telephone number you want to call.
3 Tap the Talk button.
You can configure many parameters on the CN3 such as the bar code
symbologies it decodes or the network settings. The values you set for
these parameters determine how the CN3 operates.
Operating parameters can be viewed and changed on the CN3 by
using the Intermec Settings application on the computer. There are
two ways to access Intermec Settings:
• Remotely via Intermec SmartSystems Foundation. When you use
SmartSystems, you can remotely configure all your CN3
computers as well as other SmartSystems-enabled Intermec
computers and peripherals. For more information, see the next
section.
• Directly on the CN3. Using Intermec Settings on the CN3 changes
only the settings on that computer. For more information, see
"Using Intermec Settings Directly On the CN3" on page 47.
You can also configure the CN3 with configuration bundles that you
create using SmartSystems Foundation. For more information, see
the SmartSystems Foundation online Help.
Chapter 2 — Connecting and Configuring the CN3
"Installing a
45