Intermec CN3 User Manual page 24

Chapter 1 — Using the CN3
12
To customize power timeout values
1 Tap Start > Settings > System tab > Power Profiler.
2 In the Power Profile tab, tap Enable Advanced Settings.
3 Tap the Screen Settings tab to change screen timeout values:
• Check the Enable Screen Off check box to be able to turn off
the screen independently of the CN3.
• To change the amount of inactivity time before the screen
turns off, move the Battery Power or External Power sliders.
For battery power, choose from 1 to 6 minutes. For external
power, choose from 1, 2, 5, 10, or 15 minutes, or disable this
feature.
4 Tap the Device Settings tab to change power timeout values:
• Check the Enable Device Off check box to be able to turn off
the CN3 by pressing the Power button. This feature is enabled
by default unless you are using the Windows Mobile Phone
power profile.
• To change the amount of inactivity time before the CN3 turns
off and goes into Suspend mode, move the Battery Power or
External Power sliders.
For battery power, choose from 1 to 6 minutes. For external
power, choose from 1, 2, 5, 10, or 15 minutes, or disable this
feature.
5 Tap the Power Button tab to change what happens when you
press the Power button:
• Choose Turn off the Device to put the CN3 in Suspend mode
when you press the Power button. In Suspend mode, data
connections (except for WAN) are turned off. To restore data
connections, you need to press the Power button to wake up
the CN3.
Choose Turn off the Screen if you want to leave the CN3 on
•
but with the screen turned off when you press the Power
button. This mode uses more power than Suspend mode, but
maintains all data connections. Press the Power button to turn
the screen on.
CN3 Mobile Computer User's Manual for Windows Mobile 6.1