Disabling Security - Intermec CN3 User Manual

Chapter 2 — Connecting and Configuring the CN3

Disabling Security

70
d Tap OK. The Enrollment Tool message box appears telling you
that the certificate has been added.
e Tap OK to close the message box.
If you choose not to use security with your wireless network, you can
disable it on the CN3. Intermec recommends that you always set
security in your network.
To disable security
1 Start Intermec Settings. For help, see
Parameters" on page 45.
2 Choose Communications > 802.11 Radio > Security Choice and
select Microsoft Security. An alert box appears telling you that
you must save your settings and warm boot the CN3 for the new
security choice to take effect.
3 Choose Yes. The CN3 resets and starts with Microsoft Security as
the Security Choice.
4 Start Intermec Settings.
5 Choose Communications > 802.11 Radio > Microsoft Security.
6 For Network Authentication, choose Open.
7 For Data Encryption, choose Disabled.
8 Tap OK. Your settings are saved.
CN3 Mobile Computer User's Manual for Windows Mobile 6.1
"Configuring the CN3