Configuring Wireless Security - Intermec CN3 User Manual

Configuring Wireless Security

CN3 Mobile Computer User's Manual for Windows Mobile 6.1
8 Click Next.
9 Enter the User name, Password, and Domain (if provided by an
ISP or your network administrator).
10 Tap Finish.
11 Insert the necessary equipment, such as a network card, into the
CN3 and begin connecting.
The CN3 provides four types of security for your wireless network:
• Wi-Fi Protected Access 2 (WPA2™)
Wi-Fi Protected Access (WPA)
•
• 802.1x
• WEP
This section explains how to configure wireless security on your CN3.
If you choose not to use security, see
page 70. Intermec always recommends that you implement security.
You must use either Funk or Microsoft security to implement your
security solution. For details, see the next section,
Between Microsoft and Funk Security."
Chapter 2 — Connecting and Configuring the CN3
"Disabling Security" on
"Choosing
59