Default Configuration - Intermec CN3 User Manual

Appendix B — Default Settings

Default Configuration

110
The following tables list the default values of the configuration
commands supported on the CN3. If you restore the CN3 to factory
default settings, the CN3 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. For detailed information on most of the
commands, see the
available from the Intermec web site at www.intermec.com.
Data Collection
Data Collection Setting
Enable scanner port
Enable scanner auto-detect
Symbology
AustraliaPost
Aztec
BPO
CanadaPost
ChinaPost
Codabar
Codablock A
Codablock F
Code 11
Code 39
Code 93
Code 128/GS1-128
DataMatrix
DutchPost
EAN/UPC
EAN.UCC Composite
GS1 DataBar Expanded
CN3 Mobile Computer User's Manual for Windows Mobile 6.1
Intermec Settings Command Reference
Default Value
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Enable
Disable
Enable
Enable
Disable
Enable UPC A, UPC E, EAN 8, EAN 13
Disable
Disable
Manual,
Default Value
Enable
Enable