Resetting The Cn3 - Intermec CN3 User Manual

Resetting the CN3

CN3 Mobile Computer User's Manual for Windows Mobile 6.1
8 Tap the Conf tab to set up a log file that lists RSSI history.
This screen includes the 802.11 radio driver version and available
radio modes.
To create a log file:
a Check the Log to File check box.
b (Optional) Change the sample period and number of samples
displayed.
c Tap Log File. The Save As screen appears.
d (Optional) Change the name of the saved log file, the folder to
which the file will be saved, the content type (log or text), and
the location.
e Tap Save.
You rarely need to reset the computer. If the computer does not
resume after pressing the Power button, or if the computer or an
application lock up, you may need to reset the CN3. The CN3 uses the
configuration currently saved in flash memory during the boot
process. There are three ways to reset the CN3:
• Warm booting the CN3 can correct conditions where an
application seems to be locked up. For more information, see the
next section, "Warm Booting the CN3."
Chapter 4 — Troubleshooting and Maintaining the CN3
97