Intermec CN3 User Manual page 67

CN3 Mobile Computer User's Manual for Windows Mobile 6.1
To configure or change wireless or Ethernet network settings
1 Tap the iConnect icon (
screen.
2 Choose Tools > Wireless IP Settings or Ethernet IP Settings. A
dialog box appears that shows the current settings for the wireless
or Ethernet network adapter.
3 Change settings as needed and click ok.
To check the connection status with a ping test
1 Tap the iConnect icon (
screen.
2 Choose Tools > Ping Test.
3 Choose Ethernet or Wireless from the connection type list.
4 Choose Ping my gateway or DHCP server if you are using
DHCP. Or, choose Ping the host address below and enter the
host address in the entry field.
5 Tap Ping. The ping test runs and checks your connection. If the
connection is OK, "Connection Validated" appears.
To check overall connection status
1 Tap the iConnect icon (
screen.
2 Choose Status > Ethernet or Wireless. A message box appears.
iConnect checks these items in order:
• Network connection (Ethernet or wireless) enabled
MAC address of the CN3 network adapter
•
• MAC address of the associated host
• IP address of the CN3
• Ping Status
3 Tap Try Again to test the connection again.
Chapter 2 — Connecting and Configuring the CN3
) in the lower right corner of the Today
) in the lower right corner of the Today
) in the lower right corner of the Today
55