Installing A Minisd Or Sim Card - Intermec CN3 User Manual

Chapter 1 — Using the CN3

Installing a miniSD or SIM Card

34
2 Select a file save location, type a filename prefix, and select a
compression level.
3 Tap ok.
You can corrupt your miniSD™ card if you do not follow these
installation and removal procedures exactly. Before installing a
miniSD card, inspect the gasket in the compartment for any
damage or wear, and contact your Intermec representative if you
find any damage or wear.
The miniSD card and SIM card slots are located below a door inside
the CN3 battery compartment.
When the door to the miniSD is opened and closed (for changing,
installing, or removing the SIM or miniSD card), the CN3 performs a
cold boot after you install the battery. For more information, see
"Cold Booting the CN3" on page 98.
To insert a miniSD or SIM card
1 Press the Power button to suspend the CN3, and then remove the
battery. For help with removing the battery, see
Battery" on page 5.
2 Locate the two screws on the miniSD/SIM card slot door.
3 Remove the screws and gently lift the door to the card slot.
4 Insert the SIM card or miniSD card as shown in the next
illustrations.
CN3 Mobile Computer User's Manual for Windows Mobile 6.1
"Changing the