What's New In This Release - Intermec CN3 User Manual

What's New in This Release

CN3 Mobile Computer User's Manual for Windows Mobile 6.1
Standard CN3 and CN3e features include:
• GPS, 802.11b/g, and Bluetooth® radios.
• A 2-megapixel color camera or an EA11 Area Imager
• 128 MB RAM
• A numeric, QWERTY (CN3), or alphabetic (CN3e) keypad.
You can also order an optional GSM/GPRS/EDGE WWAN radio for
the CN3.
Note: The 802.11 radio also supports the 802.11d standard, which
adds the requirements and definitions for 802.11 WLAN equipment
for operation in markets not served by the current standard. For
802.11d support, contact your local Intermec representative to order
the 802.11d version of the CN3.
Use this manual to understand how to use the features and options
available on the CN3.
For information about the Windows Mobile applications installed on
the CN3, see the online help. For additional information about using
Windows Mobile on the CN3, visit
www.intermec.com.
The CN3 with Windows Mobile 6.1 and firmware version 4.30
supports these new features:
• SmartSystems Foundation version 3.50 functionality including
Scan-to-Connect, Scan-to-Load, and One Step Provisioning. For
more information on SmartSystems Foundation, visit
www.intermec.com/smartsystems.
• SiRF InstantFix II support for GPS. For more information, see
"Setting Up GPS on the CN3" on page 36.
• the Image Capture application for CN3s with the EA11 area
imager. For more information, see
page 29.
The CN3 clean boot procedure has been updated. For more
information, see "Clean Booting the CN3" on page 100.
Chapter 1 — Using the CN3
Intermec Knowledge Central
"Capturing Images" on
at
3