Checking 802.11 Network Status - Intermec CN3 User Manual

Chapter 4 — Troubleshooting and Maintaining the CN3

Checking 802.11 Network Status

94
If you have trouble connecting to your 802.11 wireless network:
• Make sure you have correctly set network parameters on the CN3.
• Check your wireless security settings.
Follow the next procedure to use iConnect to verify available access
points and networks, check signal strength, and view other
diagnostics. If you need to contact Intermec Product Support, this
information can be helpful in troubleshooting wireless network
connection issues.
To use iConnect to verify network status
1 Tap the iConnect icon (
screen.
2 Choose Status > Wireless.
3 Tap Advanced. The diagnostics screen appears.
The ISpy tab shows:
• MAC address and IP address of the 802.11 radio.
• network association status, including the SSID and MAC
address of the access point.
• security configuration.
• radio transmit power and signal strength information.
CN3 Mobile Computer User's Manual for Windows Mobile 6.1
) in the lower right corner of the CN3