Cleaning The Cn3 - Intermec CN3 User Manual

Cleaning the CN3

CN3 Mobile Computer User's Manual for Windows Mobile 6.1
To keep the CN3 in good working order, you may need to clean the
imager or camera window and the touch screen. Clean the window
and the touch screen as often as needed for the environment in which
you are using the CN3. To clean the CN3, use a solution of ammonia
and water.
There are no user-serviceable parts inside the CN3. Opening the
CN3 voids the warranty and may cause damage to the internal
components.
To clean the imager window, camera window, and touch screen
1 Press the Power button to suspend the CN3.
2 Dip a clean cloth towel in the ammonia solution and wring out
the excess.
3 Wipe off the imager window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
Chapter 4 — Troubleshooting and Maintaining the CN3
101