Adding A User For Network Login - 3Com Switch 4500 26-Port Configuration Manual

390 A C: A
PPENDIX UTHENTICATING THE
Adding a User for
Network Login
S 4500
WITCH WITH
8 Select Submit.
9 Repeat steps 1 to 8 for each Switch 4500 on your network. When all of the Switch
4500s have been added as clients to the Cisco Secure ACS server, restart the
Secure ACS server by selecting System Configuration from the left hand side, then
select Service Control and click Restart.
Existing users on a network with a Secure ACS server can be authorized using the
TACACS+ or RADIUS server. New users connected through a Switch 4500 to the
network need to be authorized via the RADIUS server. An optional VLAN and QoS
profile can be applied to the user.
Follow these steps to add a user for Network Login.
1 Select User Setup from the left hand side
2 Enter the username, and select Add/edit
3 Enter the user information, scroll down to complete the user profile, including
specific RADIUS attributes if required.
C S ACS
ISCO ECURE