332
C
19: SSH T
HAPTER
ERMINAL
SFTP Client
Configuration
S
ERVICES
Table 360 Configure the service type to be used
Operation
Configure the service type to be used
Restore the default service type
By default, the service type is stelnet.
2 Starting the SFTP server
Perform the following configuration in system view.
Table 361 Start the SFTP server
Operation
Start the SFTP server
Shut down the SFTP server
By default, the SFTP server is shut down.
SFTP client configuration tasks are described in this section:
Command
ssh user username service-type {
stelnet | sftp | all }
undo ssh user username service-type
Command
sftp server enable
undo sftp server