Downloading Files By Means Of Tftp; Uploading Files By Means Of Tftp - 3Com Switch 4500 26-Port Configuration Manual
Switch 4500 family 26-port, 50-port, pwr 26-port, pwr 50-port
Hide thumbs
Also See for Switch 4500 26-Port:
- Manual (942 pages) ,
- Configuration manual (898 pages) ,
- Getting started manual (128 pages)
Table of Contents
Advertisement
236
C
12: F
S
HAPTER
ILE
YSTEM
Downloading Files by
means of TFTP
Uploading Files by
means of TFTP
M
ANAGEMENT
when there is no complicated interaction between the clients and server. TFTP is
implemented on the basis of UDP.
TFTP transmission is originated from the client end. To download a file, the client
sends a request to the TFTP server and then receives data from it and sends an
acknowledgement to it. To upload a file, the client sends a request to the TFTP
server and then transmits data to it and receives the acknowledgement from it.
TFTP transmits files in two modes: binary mode for program files and ASCII mode
for text files.
Figure 63 TFTP Configuration
Switch
Switch
Switch
Table 256 Configuration of the Switch as TFTP Client
Device
Configuration
Switch
Configure IP address for the
VLAN interface of the
Switch, in the same network
segment as that of TFTP
server.
Use the tftp command to
log into the remote TFTP
server for file uploading and
downloading.
PC
Start TFTP server and set
authorized TFTP directory.
To download a file, the client sends a request to the TFTP server and then receives
data from it and sends acknowledgement to it. You can use the following
commands to download files by means of TFTP.
Perform the following configuration in User View.
Table 257 Download Files by means of TFTP
Operation
Download files by means of TFTP tftp tftp-server get source-file [
To upload a file, the client sends a request to the TFTP server and then transmits
data to it and receives the acknowledgement from it. You can use the following
commands to upload files.
Perform the following configuration in User View.
Network
Network
Default Description
-
TFTP is right for the case where no
complicated interactions are required
between the client and server. Make sure
that the IP address of the VLAN interface
on the Switch is in the same network
segment as that of the TFTP server.
-
-
-
-
Command
dest-file ]
PC
PC
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
