3Com Switch 4500 26-Port Configuration Manual page 325

SSH Terminal Service 323
Figure 97 FiSSH client interface 1
In the [Host Name (or IP address)] text box, enter the IP address of the server, for
example, 10.110.28.10. Note that the IP address can be the IP address of any
interface on the server that has SSH in the state of up and a route to the client.
Selecting the protocol for remote connection
As shown in Figure 97, select the [SSH] option from the [Protocol] section.
Selecting the SSH version
From the category on the left of the window, click [Connection/SSH]. The window
as shown in Figure 98 appears.