3Com Switch 4500 26-Port Configuration Manual page 382

380 A B: RADIUS S
PPENDIX
RADIUS C S
ERVER AND LIENT ETUP
Configuring Auto VLAN and QoS for Funk RADIUS
To set up auto VLAN and QoS using Funk RADIUS, follow these steps:
1 Edit the dictionary file
RADIUS server are returned to the Switch 4500. The changes to make are:
a Add an R at the end of the correct attributes in the file, see example below.
The attributes will now appear as potential Return list attributes for every user.
2 After saving the edited
3 To use these return list attributes, they need to be assigned to a user or group.
Create a new user and add the return list attributes shown in
Table 385
Table 383 Summary of auto VLAN attributes
Table 384
For Auto VLAN
Tunnel-Medium-type
Tunnel-Private-Group-ID
Tunnel-Type
Table 385 Summary of QoS attributes
Table 386
For Auto QoS
Filter-id
so that Return list attributes from the Funk
radius.dct
file, stop and restart the Funk RADIUS service.
radius.dct
Return String
802
2
VLAN
Return String
profile=student
Table 383.and
Comment
VLAN value
Comment
QoS Profile name