Displaying Password Control; Password Control Configuration Example; Network Requirements - 3Com Switch 4500 26-Port Configuration Manual

346 C 20: P
HAPTER ASSWORD
Displaying Password
Control
Password Control
Configuration
Example

Network Requirements

C C O
ONTROL ONFIGURATION PERATIONS
If a password authentication is completed without timing out, the user will log in
the switch normally.
Table 376 Configuring the Timeout for User Password Authentication
Operation
Enter system view
Configure the timeout time of
user password authentication
After the above configurations, you can execute the display command in any view
to display the operation of the password control and verify your configurations.
Table 377 Displaying Password Control
Operation
Display the information about
the global password control
for all users
Display the information about
the password control for super
passwords
Display the information about
one or all users who have been
added to the blacklist because
of password attempt failure
A PC is connected to a Switch 4500. You can configure the password control
parameters as required.
Figure 104
Command
system-view
password-control
authentication-time
out
authentication-time
out
Command
display password-control
display password-control super
display password-control blacklist [
username username | ipaddress ip-address ]
Description
By default, it is 60 seconds.