System; Aintenance And Debugging; Basic System Configuration; Setting The System Name For The Switch - 3Com Switch 4500 26-Port Configuration Manual

15
Basic System
Configuration
Setting the System
Name for the Switch

Setting the System Clock

Setting the Time Zone

Setting the Summer
Time
S M
YSTEM
D
EBUGGING
Perform the operation of
Table 268 Set the Name for the Switch
Operation
Set the Switch system name
Restore Switch system name to default value undo sysname
Perform the operation of
Table 269 Set the System Clock
Operation Command
Set the system clock
clock datetime time date
You can configure the name of the local time zone and the time difference
between the local time and the standard Universal Time Coordinated (UTC).
Perform the following operations in the User View.
Table 270 Setting the Time Zone
Operation
Set the local time
Restore to the default UTC time zone
By default, the UTC time zone is adopted.
You can set the name, start and end time of the summer time.
Perform the following operations in the User View.
Table 271 Setting the Summer Time
Operation
Set the name and range of the summer
time
Remove the setting of the summer time undo clock summer-time
By default, the summer time is not set.
AINTENANCE AND
command in the System View.
sysname
Command
sysname sysname
command in the User View.
clock datetime
Command
clock timezone zone_name { add | minus
} HH:MM:SS
undo clock timezone
Command
clock summer-time zone_name { one-off
| repeating } start-time start-date
end-time end-date offset-time