Sending The Information To Loghost - 3Com Switch 4500 26-Port Configuration Manual

Sending the Information
to Loghost
Figure 72 Turn on/off the Information Synchronization Switch in Fabric
Device Configuration
Enable info-center
Switch
Set the information
output direction to
SNMP
To send information to loghost, follow the steps below:
1 Perform the following operation in System View.
Table 286 Enable/disable info-center
Operation
Enable info-center
Disable info-center
Info-center is enabled by default. After info-center is enabled, system
performances are affected when the system processes much information because
of information classification and outputting.
2 Configuring to output information to loghost
Perform the following operation in system view.
Figure 73 Configuring to output information to loghost
Operation
Output information to loghost
Cancel the configuration of
outputting information to loghost
Ensure to enter the correct IP address using the info-center loghost command to
configure loghost IP address. If you enter a loopback address, the system prompts
of invalid address appears.
3 Configuring information source on the switch
By this configuration, you can define the information that sent to loghost is
generated by which modules, information type, information level, and so on.
Perform the following operation in system view.
Default Value
By default, info-center is
enabled.
By default, Switches of master
log in Fabric, debugging and trap
information synchronization are
turned on, so as log and strap
information synchronization
Switches in other Switches.
Command
info-center enable
undo info-center enable
Command
info-center loghost host-ip-addr
[ channel { channel-number |
channel-name } ] [ facility
local-number ] [ language {
chinese | english }
undo info-center loghost
host-ip-addr
Logging Function 263
Configuration
Description
Other configurations are
valid only if the
info-center is enabled.
This configuration can
keep log information,
debugging information
and trap information in
Fabric in every Switch
synchronized.