Enabling/Disabling The Messenger Alert - 3Com Switch 4500 26-Port Configuration Manual

206 C 11: 802.1X C
HAPTER
Enabling/Disabling the
Messenger Alert
ONFIGURATION
Operation
Disable the idle-cut function
By default, the idle-cut function is disabled.
Enabling the Selection of the RADIUS Accounting Option
If no RADIUS server is available or if the RADIUS accounting server fails when the
accounting optional
otherwise, the user will be disconnected. The user configured with the
accounting optional
accounting update packets or offline accounting packets.
Perform the following configurations in ISP Domain View.
Table 213 Enabling the Selection of the RADIUS Accounting Option
Operation
Enable the selection of RADIUS accounting option accounting optional
Disable the selection of RADIUS accounting option undo accounting optional
By default, the selection of RADIUS accounting option is disabled.
The
accounting optional
scheme view which is only effective on the accounting that uses this RADIUS
scheme. If this command is configured both on an ISP domain and the RADIUS
scheme it uses, the latest configuration will take effect.
Messenger alert function allows the clients to inform the online users about their
remaining online time through the message alert dialog box.
The implementation of this function is as follows:
On the switch, use the following command to enable this function and to
■
configure the remaining-online-time threshold (the
alert message interval.
If the threshold is reached, the switch sends messages containing the user's
■
remaining online time to the client at the interval you configured.
The client keeps the user informed of the updated remaining online time
■
through a dialog box.
Perform the following configuration in ISP domain view.
Table 214 Enabling/disabling message alert
Operation
Enable messenger alert and configure the
remaining-online-time threshold and the interval at
which the alert message is sent
Disable messenger alert
Restore the messenger alert as the default setting
By default, messenger alert is disabled on the switch.
Command
idle-cut disable
is configured, the user can still use the network resource,
command in RADIUS scheme will no longer send real-time
Command
command can also be configured in the RADIUS
argument) and the
limit
Command
messenger time enable limit
interval
messenger time disable
undo messenger time