Creating, Modifying, And Deleting Trunks; Defining Trunk Membership; Viewing Trunk Information - 3Com 3C16476BS-US - Baseline 2250 Plus Switch User Manual

All ports in a trunk must be configured in an iden-
■
tical manner, including communication mode (that
is, speed, duplex mode and flow control).

Creating, Modifying, and Deleting Trunks

Use the Modify/Delete tabe under Trunking to create,
configure or remove ports groups from trunks.
Figure 20 Modify/Delete Screen
Trunk Number – Displays the number of the trunk.
■
Name – Allows you to label an interface. (Range:
■
1-64 characters)
Flow Control – Allows automatic or manual selec-
■
tion of flow control.
Speed Duplex – Allows auto-negotiation to be
■
enabled or disabled. When auto-negotiation is dis-
abled, you can force the settings for speed, duplex
mode and flow control.

Defining Trunk Membership

Use the Membership screen to add ports to a group
membership.
Figure 21 Membership Screen
Port – The port number
■
Status – The status refers to the speed and duplex
■
mode of the trunk members
Trunk – ID of trunk
■

Viewing Trunk Information

To view information on the configuration settings for
the created trunks, click the Summary tab under-
Trunking.
Configuring Trunking 37