Table of Contents
Advertisement
Parameter
10 - RX HEADER
11 - RX SPEED
12 - RINGS
20 - E.C.M.
(ERROR
CORRECTION)
72 - MODEM SPEED
73 - IMPROVE
REP @
74 - ERASE
MAILBOX
75 - TEXT
ATTACHMENT
76 - ATTACHMENT
FORMAT
Setting
1 - WITH
If this parameter is on, all documents received by your fax
2 - WITHOUT
will include the subscriber's header with his name, number (if
available) fax print date and the page number.
1 - 33600
Transmission speed for incoming documents.
2 - 14400
For a quality telephone line (compatible, no echo),
3 - 9600
communications occur at maximum speed.
4 - 4800
However, it may be necessary to restrict the transmission
5 - 2400
speed for some calls.
2 TO 5
Number of rings to automatically start your machine.
1 - WITH
This parameter helps correct the calls made on
2 - WITHOUT
disturbed telephone lines. It is used when the lines are weak
or too noisy. Transmission times may be longer.
1 - 56000
Choice of maximum Internet transmission speed.
2 - 33600
For a quality telephone line (compatible, no echo),
3 - 14400
communications occur at the maximum speed.
4 - 12000
However, it may be necessary to restrict the transmission
5 - 9600
speed for some Internet calls (bad line or bad ISP settings).
6 - 7200
7 - 4800
8 - 2400
9 - 1200
0 - 600
1 - WITH
This parameter lets you automatically register the Internet
2 - WITHOUT
address of your subscribers fax during a call (if available).
1 - WITH
When the fax machine receives an e-mail with an attachment
and cannot open it, it erases the message from the ISP MBX,
prints and transmits with a notice of uncomprehension to the
message sender.
2 - WITHOUT
When receiving an e-mail, the terminal does not delete the
message from the mailbox, it prints an uncomprehension
message asking you to recover this message by means of your
computer equipment.
This parameter only makes sense if you are using a computer.
The memory space that your access provider puts at your
disposal is limited. If you do not empty your mailbox, you risk
saturating it in the long term, thereby blocking the reception
of any new message.
1 - WITH
To allow adding an attachment.
2 - WITHOUT
1 - IMAGE
Default format of document sent on the Internet:
2 - PDF
PDF: monochrome or colour
IMAGE: monochrome (TIFF) or colour (JPEG)
3-10
Setting your machine
Signification
Advertisement
Table of Contents
