Sagem MF 5890DN User Manual page 152

Message
Hard disk err ##
Press GO
I/F occupied
ID error
Install MK
KPDL error ##
Press GO
Load Cassette #
(A4)/(PLAIN)
Load MP Tray
(A4)/(PLAIN)
A Microdrive error has occurred. Look at the error code given in place
of ## and refer to Storage Error Codes p. 6-25. To ignore the
Microdrive error, press [GO].
This message is displayed when you attempt to use the printer's
operation panel to change the environmental settings on the interface
from which data are presently being received.
The user ID entered for a private job, or a stored job is not correct.
Check the user ID that you specified on the printer driver.
Replace Maintenance Kit which is displayed on the message display.
Replacement of the maintenance kit is necessary at every 300,000
pages of printing and requires professional servicing. Contact your
service technician.
Current print processing cannot continue because of occurrence of
KPDL error which is categorized by ##. To print out an error report,
display > Print KPDL err(s) from the menu system, and select On.
Press [GO] to resume printing. You can abandon printing by pressing
[Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed
after a preset period of time.
The paper cassette matching the paper size and paper type of the
print job is empty. Load paper into the paper cassette as displayed in
place of #. Press [GO] to resume printing.
If you want to print from a different paper source, press ? or @ to
display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing [Menu], Paper
Handling > appears. By pressing the ?, the paper type settings
menu appears. After setting the correct paper type, press [OK] and
printing starts.
There is no paper cassette installed in the printer that matches the
paper size and paper type of the print job. Set paper in the MP tray.
Press [GO] to resume printing. (Note that feeding the paper having a
paper size which does not match the current paper size from the MP
tray can cause paper jam.)
If you want to print from a different paper source, press ? or @ to
display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing [Menu], Paper
Handling > appears. By pressing the B, the paper type settings
menu appears. After setting the correct paper type, press [OK] and
printing starts.
6-22
Corrective Action
Maintenance