Mail Box (Mbx Fax) - Sagem MF 5890DN User Manual

The charge code will always be hidden.
The maximum length that can be entered is 30 characters. When dialing, only the digits are sent on the
line. The "+" symbol inserted is not sent. In the example above, the number 97380884440123 is dialed.
If your equipment is connected to a private exchange (PABX), enter the prefix (number used by your
PABX to access the telephone network, for example 0), followed by a "/" (or pause).
When a charge code is used, the transmission reports and the machine log printout contains the
correspondent's number followed by the charge code's "+" symbol.
M
AIL BOX
There are 32 mailboxes (MBX), enabling you to transmit documents in complete confidence using an
access code (named code MBX), to all subscribers equipped with a fax compatible to yours.
MBX 00 is public. It is handled directly by the terminal to record the messages of the fax TAD as soon
as this is put into service.
MBX's 01 to 31 are private. Each is password-protected. They can be used to receive documents
confidentially.
The use and access to MBX 01 - 31 are conditioned by the initialisation, defined by a MBX code (if
needed) and a mnenonic (its S.I.D.).
Later you may:
• modify the features of an MBX
• print the contents of an MBX, only possible if the MBX contains one or more documents (with a
star next to the MBX). When the contents of an MBX have been printed it becomes empty
• delete an MBX, only if the MBX is initialised and empty
• print the list of your fax machine's MBX's
You may receive and send through an MBX in complete confidentiality.
The deposit a document into your MBX, the access code is not needed. All documents deposited in a
MBX are added to the ones already present.
In polling, the MBX are only accessible with an MBX code.
You may perform MBX deposits or polls by:
• depositing a document in a fax MBX
• transmit to deposit a document in a remote fax MBX
• perform document poll from a remote fax.
(MBX FAX)
5-38
Operation