Sagem MF 5890DN User Manual page 19

Installation
The leads and cables are connected separately to the scanner and the printer. We advise you start
with connecting the leads and cables that arrive on the scanner unit.
Connecting the leads and cables to the scanner
1
Make sure that the mains on/off switches of scanner and printer are set to "O".
1 - Connect the Centronics cable to the scanner, lock it with the two metal clips.
2 - Plug the LAN cable (not supplied) into the LAN network connector of the scanner.
3 - Plug the telephone cable into the telephone connector of the scanner.
4 - Connect the mains lead to the mains inlet of the scanner.
5 - Connect the 220/240V mains extension lead for the printer to the mains outlet of the
scanner.
6 - Plug the USB cable (not supplied) into the slave USB connector, if applicable.
7 - Depending on the model, you can plug a second telephone cable into the other telephone
connector of the scanner.
Connecting the leads and cables to the printer
1 - Connect the Centronics cable to the printer and lock it with the two metal clips.
2 - Plug the LAN cable (not supplied) into the LAN network connector of the printer
3 - Connect the mains extension lead to the mains socket of the printer.
C
ONNECTIONS
7
6
2
1-11
3 4 5