P
R
RINTED
ESULTS
-
Dirt on the top edge
or back of the
paper
Printing incomplete
or out of position
Error Messages
The following table lists errors and maintenance messages that you can be dealt with by yourself.
If Call service appears, turn off the printer, disconnect the power cord, and contact your service
technician.
Some errors cause the alarm to sound. To stop the alarm, press [Cancel].
Message
Add paper MPTray
Call service
F###
Call service
####:0123456
Cassette #
not loaded
C
A
ORRECTIVE
CTION
-
Clean the parts in the paper paths—such as the paper cassette,
etc.
Check that the application software is correctly operated.
Refer to Tips p. 6-18.
The paper has run out in the paper source displayed. Supply paper
according to the paper source displayed (paper cassettes, MP tray,
optional paper feeders, or optional envelope feeder [FS-3900DN/
FS-4000DN only]).
This message is displayed alternately with messages indicating the
printer status, such as, Ready, Please wait, Processing,
Waiting, and FormFeed Time Out.
F### represents a controller error (#=0, 1, 2, ...). Call for service. The
printer does not operate when this message is displayed.
#### represents a mechanical error (#=0, 1, 2, ...). Call for service.
The printer does not operate when this message is displayed. The
total number of pages printed is also indicated, e.g. 0123456.
The corresponding paper cassette is not installed. Install the cassette.
The cassette number can be 1 (topmost) to 4 (bottom) [FS-2000D: 1
and 2].
6-20
Corrective Action
Maintenance