Scanner Calibration; Incidents; Communication Errors; Transmission From The Feeder - Sagem MF 5890DN User Manual

Caution -
Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.
The fusing unit can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit has
cooled before cleaning the interior of the printer.
For guaranteed performance of your terminal, some maintenance work (replacing the fusing unit and
the transfer roll) has to be done on the printer approximatly every 200,000 printed pages. Please contact
your supplier for this operation.
You can perform this operation when the quality of photocopied documents is no longer satisfactory.
Confirm your choice by pressing the OK key.
I
NCIDENTS
If the communication fails, the fax advises you of an automatic retry later.
Example of what is displayed:
Current time- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Time of next try - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Transmission from the feeder

You have the choice between:
• waiting until the transmission takes place at the given time
• restarting the transmission immediately by pressing
• abandoning transmission by pressing
S
ERVICING
S
CANNER CALIBRATION
C
OMMUNICATION ERRORS
6-12
80 OK - ADVANCED FCT / CALIBRATION
. To eject the document, press
Maintenance
FRI 11 SEP 20:13
0142685014 20:18
again.