Table of Contents
Advertisement
Maintenance
Insert the developer unit together with the toner container, back into the machine.
Close the top cover and MP tray. The printer warms up and resumes printing.
Rear Unit
If paper is not completely ejected into the output tray, open the rear unit.
Open the fuser cover and remove the jammed paper by pulling it out.
If you cannot find a paper jam, try checking inside the rear of the printer.
Caution -
result in burn injury.
Close the rear unit. The printer warms up and resumes printing.out.
The fuser unit inside the printer is hot. Do not touch it with your hands as it may
6-31
Advertisement
Table of Contents
