Sntp Server Configuration - Sagem MF 5890DN User Manual

Setting your machine
These two addresses must be filled in for the Scan To Disk function.
Enter the IP address of each server, then validate with OK.
Note: If the terminal is set up in Automatic configuration mode (
matically by certain DHCP servers.
Case of connection to a domain (for instance with Windows NT,
2000 or XP)
The terminal can identify itself on the local network by using the parameters of a user account,
before it can, among others, archive documents by means of the Scan to Disk function.
Once these parameters have been filled in, they will be used by default, if you do not declare a
user name and password when using the function.
Login user name
Enter the user name for login on the local network, then validate with OK.
Login password
Enter the password for login on the local network, then validate with OK.
Domain name
Enter the domain name of the local network, then validate with OK.

SNTP server configuration

The terminal can automatically update its date and time when connecting to an SNTP server.
Server address
Enter the name of the SNTP server, then validate with OK.
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
Server port
Enter the server port number, then validate with OK.
The port by default is port 123.
2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 1
2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 2
2541 OK - SETUP / NETWORKS / DOM LOGIN / USER
2542 OK - SETUP / NETWORKS / DOM LOGIN / PASSWORD
2543 OK - SETUP / NETWORKS / DOM LOGIN / DOM. NAME
2551 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
2552 OK - SETUP / NETWORKS / SNTP SERVER /PORT
3-13
2531), these addresses can be filled in auto-