Sagem MF 5890DN User Manual page 153

Maintenance
Message
Memory overflow
Press GO
MemoryCard err##
Press GO
MemoryCard err20
Missing
developer unit
No multi copies
Press GO
Paper jam
###############
Paper path error
Print overrun
Press GO
RAM disk error##
Press GO
Replace toner
Clean printer
The total amount of data received by the printer exceeds the printer's
internal memory. Try adding more memory. Press [GO] to resume
printing. You can abandon printing by pressing [Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed
after a preset period of time.
A CompactFlash card error has occurred. Look at the error code
given in place of ## and refer to Storage Error Codes p. 6-25. To
ignore the CompactFlash card error, press [GO].
The CompactFlash card is accidentally removed from the printer's
slot during reading. Turn the power switch off and then back on again.
The developer unit is either not installed or incorrectly inserted. Insert
the developer unit securely.
Multi copies cannot be printed because RAM disk is disabled or the
Microdrive is not installed. There is no available RAM disk or
Microdrive space. Delete unnecessary files. Press [GO] to print error
report.
A paper jam has occurred. The location of the paper jam is indicated
in place of the #'s. For details, refer to Clearing Paper Jams p. 6-26.
There is no paper cassette in the feeder, or the cassette is not
inserted properly. After reinserting the paper cassette, you should be
able to print. When two or more optional feeders are installed and the
lowest one is selected, the same message will appear if any of the
upper paper feeder and the printer cassette is improperly installed.
The print job transferred to the printer was too complex to print on a
page. Press [GO] to resume printing. (A page break may be
automatically inserted in some places.).
You can abandon printing by pressing [Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed
after a preset period of time.
A RAM disk error has occurred. Look at the error code given in place
of ## and refer to Storage Error Codes p. 6-25. To ignore the RAM
disk error, press [GO].
Toner has run out in the toner container. Replace the toner container
using a new toner kit. The printer does not operate when this
message is displayed.
6-23
Corrective Action