Memory Scan Operation; Select Memory Scan Operation - Icom IC-7700 Instruction Manual

9
SCANS

■ Memory scan operation

[SQL]
MEMO
F-1

■ Select memory scan operation

SELECT
F-3
[SQL]
MEMO
F-1
EXIT/SET Main dial
SEL No.
F-5
EXIT/SET Main dial
q Push
EXIT/SET
tion screen, if necessary.
w Select memory mode.
e Push [SCAN] F-5
r Set [SQL] open or closed.
• See page 9-2 for squelch condition.
t Push [MEMO]
F-1
• "
MEMORY SCAN
ning.
y When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
u To cancel the scan, push [MEMO]
• Rotating the main dial also cancels the scan.
2 or more memory channels must be programmed
for memory scan to start.
q Push
EXIT/SET
tion screen, if necessary.
w Select memory mode.
e Push [SCAN] F-5
r Set [SQL] open or closed.
• See page 9-2 for squelch condition.
t Push [SEL No.]
select scan number from ★1, ★2, ★3 and ★1,2,3.
y Push [MEMO] F-1
• "
MEMORY SCAN
ning.
u Push [SELECT]
push [SELECT]
scan, if desired.
• "
SELECT MEMORY SCAN
"
MEMORY SCAN
i When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
o To cancel the scan, push [MEMO]
• Rotating the main dial also cancels the scan.
2 or more memory channels must be designated
as select memory channels, as well as the same
select scan channel number, for select memory
scan to start.
9-6
several times to close a multi-func-
to select the scan screen.
to start the memory scan.
" and decimal points blink while scan-
F-1
several times to close a multi-func-
to select the scan screen.
several times to select the
F-5
to start the memory scan.
" and decimal points blink while scan-
F-3 to start select memory scan;
again to return to memory
F-3
" b l i n k s i n s t e a d o f
" during select memory scan.
F-1
.
.