Autotune Function - Icom IC-7700 Instruction Manual

■ Autotune function

AUTO
TUNE
AUTOTUNE
Appears
5-19
FUNCTIONS FOR RECEIVE
The Automatic tuning function tunes the displayed
frequency (max. CW: ±500 Hz, AM: ±5 kHz) automati-
cally when an off-frequency signal is received. This
function is active while in CW or AM mode is selected.
➥ Push [AUTOTUNE] to toggle the autotune function
ON or OFF.
• " " blinks when autotune function is acti-
AUTOTUNE
vated.
• After 2 sec. has passed, the autotune function stops
tuning automatically even it's still off-frequency.
IMPORTANT!
When receiving a weak signal, or receiving a sig-
nal with interference, the automatic tuning function
may tune the receiver to an undesired signal.
5