Memory Scan Operation - Icom IC-7610 Advanced Manual

8. SCANS
Memory scan (Continued)
D Select Memory scan operation
1. Select the Main band.
2. Display the SCAN screen.
» SCAN
MENU
3. Touch [MEMO] to start a regular Memory scan.
L When a signal is detected, the scan pauses
according to the "SCAN Resume" setting, and then
resumes.
Blinks
4. While scanning, touch [SEL No.] to select the
Select Memory scan number.
L Each time you touch [SEL No.], "★1," "★2," "★3,"
and "★1,2,3" are alternately displayed.
Channels speciied as ★1 are scanned.
★1:
Channels speciied as ★2 are scanned.
★2:
Channels speciied as ★3 are scanned.
★3:
★1,2,3: Channels speciied as ★1, ★2, or ★3 are
scanned.
Select the Select Memory scan
number (Example: ★1)
5. Touch [SELECT] to switch to the Select Memory
scan.
L Touching [SELECT] switches between the Memory
6. To cancel the scan, touch [MEMO].
7. To close the SCAN screen, push
Memory scan
Clearing all Select Memory channel settings
1. Touch [SELECT] for 1 second on the SCAN
2. Touch the Select Memory channel setting to
70
scan and the Select Memory scan.
Blinks
screen.
• The SELECT ALL CLEAR screen is displayed.
clear.
Select Memory scan
.
EXIT