Operating Fm; D Convenient Functions For Receive; D Convenient Functions For Transmit - Icom IC-7700 Instruction Manual

■ Operating FM

[MIC] [TX] indicator [RX] indicator
[AF]
AM/FM
Appears

D Convenient functions for receive

• Preamp (p. 5-9)
➥ Push [P.AMP]
(MF3)
preamp OFF, preamp 1 ON or preamp 2 ON.
• Push and hold [P.AMP] (MF3) for 1 sec. to turn the
preamp function OFF.
• "P.AMP1" or "P.AMP2" appears when the preamp 1
or preamp 2 is ON.
• Auto notch filter (p. 5-18)
➥ Push to turn the auto notch function
NOTCH
ON or OFF.
• Notch indicator (above
the auto notch is ON.

D Convenient functions for transmit

• VOX (voice operated transmit) (p. 6-2)
➥ Push VOX to turn the VOX function ON or
OFF.
• " " appears when the VOX function is ON.
VOX
• Transmit quality monitor (p. 6-4)
➥ Push to turn the monitor function ON
MONITOR
or OFF.
• Rotate [MONI GAIN] to adjust the monitor gain.
• Monitor indicator (above
when the monitor function is ON.
Band keys
Main dial
FILTER
several times to set the
switch) lights when
NOTCH
switch) lights
MONITOR
q Push a band key to select the desired band.
w Push to select FM.
AM/FM
• "FM" indicator appears.
• After FM mode is selected, push
tween FM and AM modes.
e Rotate the main dial to tune to the desired fre-
quency.
• The S-meter indicates received signal strength when
signal is received.
• 10 kHz tuning step is preset for the FM mode.
• Push
FILTER
width.
r Rotate [AF] to set audio to a comfortable listening
level.
t Push TRANSMIT
• The TX indicator lights red.
y Speak into the microphone at your normal voice
level.
• Adjust the microphone gain with [MIC] at this step, if
necessary.
• FM narrow transmission is available when "FIL2" or
"FIL3" is selected.
u Push
TRANSMIT
return to receive.
• Attenuator (p. 5-9)
➥ Push [ATT]
(MF4)
ator in 6 dB steps.
• Push and hold [ATT]
attenuator function OFF.
• "ATT" and attenuation level appear when the attenu-
ator is ON.
• Audio tone control (p. 12-4)
➥ Push [SET]
level set mode. Select an item with [Y]
then rotate the main dial to adjust the audio
F-2
tone.
• Audio tone control (p. 12-5)
➥ Push [SET]
level set mode. Select an item with [Y]
then rotate the main dial to adjust the audio
F-2
tone.
4-31
RECEIVE AND TRANSMIT
AM/FM
several times to select the desired filter
or [PTT] (microphone) to transmit.
or release [PTT] (microphone) to
several times to set the attenu-
for 1 sec. to turn the
(MF4)
F-7 then [LEVEL] F-1
F-7 then [LEVEL] F-1
4
to toggle be-
to enter
F-1 /[Z]
to enter
F-1 /[Z]