Sending A Recorded Message; D Transmit Level Setting - Icom IC-7700 Instruction Manual

7
VOICE RECORDER FUNCTIONS

■ Sending a recorded message

T1 T2 T3
F-1 F-2 F-3
Appears

D Transmit level setting

TX LEV.
F-6
EXIT/SET
T4 T/R
F-4 F-7
Counts down
DEF
F-7
EXIT/SET Main dial
q Push
EXIT/SET
tion screen, if necessary.
w Select a phone mode by pushing
.
e Push [VOICE]
screen.
• If the receive voice message appears, push [T/R]
to select TX message (T1–T4).
r Push the desired message switch, [T1]
, momentarily to transmit the contents.
F-4
• The transceiver transmits automatically.
• " " indicator appears and the memory timer
SEND
counts down.
• You hear the transmitted message from the speaker as
the default. This can be turned OFF in voice set mode.
(p. 7-9)
t Push the selected message switch, [T1]
[T4] F-4 , again to stop, if desired.
• The transceiver returns to receive automatically when
all of the recorded contents in the message are trans-
mitted.
y Push
EXIT/SET
screen.
✔ For your information
When an external keypad or USB keyboard is con-
nected, the recorded message, T1–T4, can be trans-
mitted without opening the voice recorder screen.
See pages 2-6, 2-7, 12-16 and 12-17 for details.
q Call up the voice recorder screen as described
above.
w Push [TX LEV.]
transmit level set condition.
e Push the desired message switch, [T1]
F-4 , momentarily to transmit the contents.
• The transceiver transmits automatically.
• " " indicator appears and the memory timer
SEND
counts down.
r Rotate the main dial to adjust the transmit voice
level.
• Push and hold [DEF]
fault condition.
t Push
EXIT/SET
screen.
7-8
several times to close a multi-func-
SSB
to call up the voice recorder
F-2
twice to exit the voice memory
F-6 to select the voice memory
for 1 sec. to select the de-
F-7
to return to the voice recorder
or AM/FM
F-7
F-1 to [T4]
to
F-1
to [T4]
F-1