Firmware Update- Usb-Memory - Icom IC-7700 Instruction Manual

16
UPDATING THE FIRMWARE
■ Firmware update— USB-Memory
/
FIRM UP √
F-3
/
/
∫ DIR/FILE √ ∫
F-1 F-2
/ /
OK SET USB CANCEL
F-6 F-7
EXIT/SET
FIRM UP
F-4
When updating the firmware with the USB-Memory,
no IP address or subnet mask settings are necessary.
q Copy the downloaded firmware data into the USB-
Memory ("IC-7700" folder).
• The USB-Memory must have been formatted by the
IC-7700.
w Insert the USB-Memory into the USB connector.
e Push EXIT/SET
tion screen, if necessary.
r Push [SET]
F-7
t Push [USB]
F-7
y Push and hold [FIRM UP]
u Read the displayed precaution carefully.
• Push [Y] or [Z]
F-1
• Push [CANCEL]
i After you read and understand all of the precau-
tions, push [OK]
• [OK] appears only following the precautions.
F-6
• Push [CANCEL]
o Push [Y] F-2
file, then push [FIRM UP]
!0 Read the displayed precautions carefully.
!1 If you agree, push and hold [OK]
start the firmware update.
• Push [CANCEL]
!2 While loading the firmware from the USB-Memory,
the dialog as at left is displayed.
16-4
several times to close a multi-func-
to select set mode menu screen.
to select USB-Memory set menu.
for 1 sec.
F-3
to scroll the display.
F-2
to cancel the firmware updating.
F-7
.
F-6
to cancel the firmware updating.
F-7
or [Z] F-3 to select the firmware
F-4 .
F-6
to cancel the firmware updating.
F-7
for 1 sec. to