Preface; About This Document - Intergraph RealiZm Graphics Z10 Hardware User's Manual

Preface

The RealiZm Graphics Hardware User's Guide provides instructions for installing
Intergraph's Z10, Z13, Z25, and V25 three-dimensional (3D) graphics accelerators into
Intergraph's 3D graphics workstations. This guide provides hardware and software
installation procedures, troubleshooting information, technical and hardware descriptions, and
specifications.

About This Document

The RealiZm Graphics Hardware User's Guide is organized as follows:
u
Chapter 1, "Getting Started," introduces RealiZm graphics accelerators.
u
Chapter 2, "Installing or Replacing Z10," provides static precautions and instructions for
installing the optional texturing accelerator onto the Z10 board. It provides replacement
instructions for Z10 (and Z10-T) and installing Z10 (or Z10-T) for dual-screen use in a
deskside system. It also provides instructions for installing the video display driver and
troubleshooting.
u
Chapter 3, "Installing or Replacing Z13, Z25, and V25," provides static precautions and
instructions for installing optional texture memory on Z13, Z25, and V25. It provides
replacement instructions for the Z13, Z25, V25, or optional Geometry Accelerator and
installing Z13 (or Z25, or V25) for dual-screen use in a deskside system. It also provides
instructions for installing the video display driver and troubleshooting.
u
Chapter 4, "Technical Description," covers the technical features and functions of the
RealiZm graphics accelerators.
u
Chapter 5, "Hardware Description," contains a hardware description of the RealiZm
graphics accelerators.
u
Chapter 6, "Specifications," lists the specifications for the RealiZm graphics accelerators.
ix