Preface; About This Document; Document Conventions - Intergraph StudioZ RenderRAX III System Setup

Preface

This System Setup document describes setting up, configuring, and reinstalling system
software on your Intergraph Computer Systems rack-mount RAX system. This document
supports the following RAX systems:
u
StudioZ RenderRAX III
u
ViZ RAX

About This Document

This System Setup document is organized as follows:
u
Chapter 1, "Setting Up the Hardware," describes how to set up the system hardware.
u
Chapter 2, "Setting Up the Software," describes how to set up the operating system and
associated system software.
u
Chapter 3, "Configuring the System," describes how to configure the system for use.
u
Chapter 4, "Operating Notes," describes how to use essential system features and
provides other important basic information.
u
Chapter 5, "Configuring the BIOS," describes how to use the BIOS Setup program to
configure the system's basic input/output system (BIOS).
u
Chapter 6, "Troubleshooting," describes how to resolve common system problems.
u
Chapter 7, "Reinstalling System Software," describes how to reinstall the operating
system and associated system software, if required.
u
Chapter 8, "Using System Resources," provides information on using system resources.

Document Conventions

Bold
Italic
Monospace
SMALL CAPS
+
CTRL D
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard (such as
directories. You can type filenames and directory names in the dialog boxes
or the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and simultaneously.
CTRL D
, , or 3) and names of files and
D ALT F
vii