Declaration Of Conformity For Rf Exposure; Guidelines For Operating Cisco Aironet Wireless Lan Client Adapters In Japan; Japanese Translation; English Translation - Cisco CB21AG Installation And Configuration Manual

Appendix C Declarations of Conformity and Regulatory Information

Declaration of Conformity for RF Exposure

The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure
from radio frequency devices.
Guidelines for Operating Cisco Aironet Wireless LAN Client
Adapters in Japan
This section provides guidelines for avoiding interference when operating Cisco Aironet Wireless LAN
Client Adapters in Japan. These guidelines are provided in both Japanese and English.
The use of 5-GHz devices is limited to indoor use in Japan.
Note

Japanese Translation

English Translation

This equipment operates in the same frequency bandwidth as industrial, scientific, and medical devices
such as microwave ovens and mobile object identification (RF-ID) systems (licensed premises radio
stations and unlicensed specified low-power radio stations) used in factory production lines.
1.
2.
3.
Contact Number: 03-5549-6500
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
03-5549-6500
Before using this equipment, make sure that no premises radio stations or specified low-power radio
stations of RF-ID are used in the vicinity.
If this equipment causes RF interference to a premises radio station of RF-ID, promptly change the
frequency or stop using the device; contact the number below and ask for recommendations on
avoiding radio interference, such as setting partitions.
If this equipment causes RF interference to a specified low-power radio station of RF-ID, contact
the number below.

Declaration of Conformity for RF Exposure

C-7