Appendix E
Configuring the Client Adapter through the Windows XP Operating System
Figure E-2
Perform one of the following:
Step 8
If you chose an SSID from the list of available networks, make sure the SSID appears in the Network
•
name (SSID) field.
If you clicked Add, enter the case-sensitive SSID of the access point or the ad hoc network to which
•
you want the client adapter to associate in the Network name (SSID) field.
Step 9
Check the This is a computer-to-computer (ad hoc mode) network; wireless access points are not
used check box at the bottom of the window if you are planning to operate the client adapter in an ad
hoc network.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Wireless Network Properties Window (Association Tab)
Configuring the Client Adapter
E-7