Resolving Resource Conflicts In Windows Xp - Cisco CB21AG Installation And Configuration Manual

Troubleshooting the Client Adapter
Step 12 Scroll through the IRQs in the Value dialog box and choose one that does not conflict with another
device. The Conflict Information window at the bottom of the window indicates if the IRQ is already
being used.
Click OK.
Step 13
Step 14 Reboot your computer.

Resolving Resource Conflicts in Windows XP

These instructions assume you are using the Windows XP classic view, not the category view.
Note
Double-click My Computer, Control Panel, and System.
Step 1
Click the Hardware tab and Device Manager.
Step 2
Under Network Adapters, double-click the Cisco Systems Wireless LAN Adapter.
Step 3
Step 4 In the General window, the Device Status field indicates if a resource problem exists. If a problem is
indicated, click the Resources tab.
Step 5 Uncheck the Use automatic settings check box.
Step 6 Under Resource Settings, click I/O Range.
Step 7 Look in the Conflicting Device list at the bottom of the window. If it indicates that the range is being
used by another device, click the Change Setting button.
Step 8 Scroll through the ranges in the Value dialog box and choose one that does not conflict with another
device. The Conflict Information window at the bottom of the window indicates if the range is already
being used.
Step 9 Click OK.
Step 10 Under Resource Settings, click IRQ.
Step 11 Look in the Conflicting Device list at the bottom of the window. If it indicates that the IRQ is being used
by another device, click the Change Setting button.
Step 12 Scroll through the IRQs in the Value dialog box and choose one that does not conflict with another
device. The Conflict Information window at the bottom of the window indicates if the IRQ is already
being used.
Step 13 Click OK.
Step 14 Reboot your computer.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
10-10
Chapter 10 Troubleshooting
OL-4211-02