Cisco CB21AG Installation And Configuration Manual page 146

Troubleshooting the Client Adapter
Figure 10-1 Troubleshooting Utility Window
Click Run Test. The utility performs the following series of seven tests to check the operation of your
Step 2
client adapter and to identify specific problems if they exist:
Driver installation test
1.
Card insertion test
2.
Card enable test
3.
Radio test
4.
5. Association test
6. Authentication test
7. Network test
The utility runs and then displays the results for each test (see
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
10-4
Chapter 10 Troubleshooting
Figure 10-2).
OL-4211-02