Cisco CB21AG Installation And Configuration Manual page 80
Aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Setting Security Parameters
Table 5-4
Security Feature
EAP-TLS authentication with WPA
If using ADU to
configure card
If using Windows XP
to configure card
PEAP authentication
If using ADU to
configure card
If using Windows XP
to configure card
PEAP authentication with WPA
If using ADU to
configure card
If using Windows XP
to configure card
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-20
Client and Access Point Security Settings (continued)
Client Setting
Choose WPA and EAP-TLS; then
set EAP-TLS settings
Enable WPA and choose Enable
network access control using IEEE
802.1X and Smart Card or other
Certificate as the EAP Type
Choose 802.1x and PEAP
(EAP-GTC) or PEAP
(EAP-MSCHAP V2); then set
PEAP settings
Choose Enable network access
control using IEEE 802.1X and
PEAP as the EAP Type
Choose WPA and PEAP
(EAP-GTC) or PEAP
(EAP-MSCHAP V2); then set
PEAP settings
Enable WPA and choose Enable
network access control using IEEE
802.1X and PEAP as the EAP Type
Chapter 5
Configuring the Client Adapter
Access Point Setting
Choose a cipher suite that includes
TKIP; then enable WPA and Open
Authentication for the SSID and
specify the use of EAP
To allow both WPA and
Note
non-WPA clients to use the
SSID, enable optional
WPA.
Choose a cipher suite that includes
TKIP; then enable WPA and Open
Authentication for the SSID and
specify the use of EAP
Note
To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
Set up and enable WEP and enable
Open Authentication for the SSID
and specify the use of EAP
Set up and enable WEP and enable
Open Authentication for the SSID
and specify the use of EAP
Choose a cipher suite that includes
TKIP; then enable WPA and Open
Authentication for the SSID and
specify the use of EAP
Note
To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
Choose a cipher suite that includes
TKIP; then enable WPA and Open
Authentication for the SSID and
specify the use of EAP
To allow both WPA and
Note
non-WPA clients to use the
SSID, enable optional
WPA.
OL-4211-02
Advertisement
Table of Contents
Troubleshooting
