Cisco CB21AG Installation And Configuration Manual page 199

Appendix E Configuring the Client Adapter through the Windows XP Operating System
Step 2 Check the Enable IEEE 802.1x authentication for this network check box if you did not enable WPA
on the Association window.
Step 3 For EAP type, choose Smart Card or other Certificate.
Step 4 Click Properties. The Smart Card or other Certificate Properties window appears (see
Figure E-4
Step 5 Choose the Use a certificate on this computer option.
Check the Use simple certificate selection (Recommended) check box.
Step 6
Check the Validate server certificate check box if server certificate validation is required.
Step 7
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Smart Card or other Certificate Properties Window
Configuring the Client Adapter
Figure E-4).
E-11