Disabling Static Wep, Wpa Passphrase, Or Eap; Setting Roaming Parameters In The Windows Control Panel - Cisco CB21AG Installation And Configuration Manual

Setting Roaming Parameters in the Windows Control Panel

Disabling Static WEP, WPA Passphrase, or EAP

To disable static WEP, WPA passphrase, or EAP authentication [LEAP, EAP-TLS, PEAP (EAP-GTC),
or PEAP (EAP-MSCHAP V2)] for a particular profile, choose None on the Profile Management
(Security) window and click OK.
Note Choosing any security option other than Pre-Shared Key (Static WEP) on the Profile Management
(Security) window disables static WEP automatically.
Note Choosing Pre-Shared Key (Static WEP) or WPA Passphrase on the Profile Management (Security)
window disables EAP automatically.
Setting Roaming Parameters in the Windows Control Panel
The Cisco Aironet 802.11a/b/g Wireless Adapter Properties window (see
Control Panel enables you to set two parameters that regulate the client adapter's roaming capabilities.
Figure 5-13 Cisco Aironet 802.11a/b/g Wireless Adapter Properties Window
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-34
Chapter 5 Configuring the Client Adapter
Figure 5-13) in the Windows
OL-4211-02