Declaration Of Conformity For Rf Exposure - Cisco Aironet Wireless LAN Client Installation And Configuration Manual

Wireless lan client adapters, guide for ms-dos
Hide thumbs Also See for Cisco Aironet Wireless LAN Client:
Table of Contents

Advertisement

Declaration of Conformity for RF Exposure

The following CE mark is affixed to the 350 series mini-PCI card:
This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted
Note
to certain frequencies or may require a license for operation. For more details, contact Cisco
Corporate Compliance.
Combinations of power levels and antennas resulting in a radiated power level of above 100 mW
Note
equivalent isotropic radiated power (EIRP) are considered as not compliant with the above mentioned
directive and are not allowed for use within the European community and countries that have adopted
the European R&TTE directive 1999/5/EC and the CEPT recommendation Rec 70.03. For more
details on legal combinations of power levels and antennas, contact Cisco Corporate Compliance.
Declaration of Conformity for RF Exposure
The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure
from radio frequency devices.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
C-6
Appendix C
Declarations of Conformity and Regulatory Information
OL-1744-02

Advertisement

Table of Contents
loading

Table of Contents