Creating A New Profile - Cisco CB21AG Installation And Configuration Manual

Creating a New Profile

Creating a New Profile

Follow the steps below to create a new profile.
Step 1 Perform one of the following:
•
•
Figure 4-2
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
4-4
If you want to create a new profile from scratch, click New on the Cisco Aironet Desktop Utility
(Profile Management) window. Then go to
If you want to find an available network and create a profile based on it, click Scan on the Cisco
Aironet Desktop Utility (Profile Management) window. The Available Infrastructure and Ad Hoc
Networks window appears (see
Available Infrastructure and Ad Hoc Networks Window
This window displays a list of all available networks. Click the Refresh button when you want to
refresh the window and update the list of available networks.
Note The Allow Broadcast SSID to Associate option on the access point must be enabled for the
SSID to appear in the list of available networks.
Table 4-2 provides a description of the fields on the Available Infrastructure and Ad Hoc Networks
window.
Step 4.
Figure 4-2).
Chapter 4 Using the Profile Manager
OL-4211-02